DIGITAL SERVO
![]() Click to enlarge |
|
Control System: | PWM Pulse Width Control |
Processor: | Digital IC |
Required Pulse: | 3 to 5 V Peak to Peak Square Wave |
Working frequence: | 760 μs /560 Hz |
Rotation angle sensor: | Precision Potentiometer |
Rotation: | Left Rotation: 60° , Right Rotation: 60° |
Voltage: | 4.5V to 8.4V |
Temperature Range: | -20℃ to 70℃ |
Driver Type: | |
Operating Angle: | 60 Deg. one side pulse traveling 300μs |
Direction: | Clockwise/Pulse Traveling 450μs-1050μs |
Pulse Width Scope: | 450-1050μs |
Neutral pulse: | 750μs (Super Narrow Pulse) |
Speed:(No-load ): | 0.05sec/ 60° @ 6.0V |
0.04sec/ 60° @ 7.4V | |
Torque:(Stall Full load): | 5.00 kg . cm @ 6.0V |
6.00 kg . cm @ 7.4V | |
Idle Current: | 0.050 A/ 6.0V 0.060 A/ 7.4V |
Running Current: | 0.300 A/ 6.0V 0.400 A/ 7.4V |
Stall Current: | 2.5 A/ 6.0V 2.9 A/ 7.4V |
Motor Type: | |
Bearings: | 2 Ball Bearing |
Bearing Type: | MR106(6mm x 10mm x 2.5mm) |
MR106(6mm x 10mm x 2.5mm) | |
Gear Material: | Chrome-Titanium-Al alloy(7075) |
Servo case: | Upper/lower PA66 Mid aluminum |
Plug: | |
Connector Wire Length: | 300.00 mm |
Connector Wire SPEC: | OD0.8mm/16 x 0.08mm 3p x 160mm (JR) |
Weight: | 57.00 g |
Dimensions (L x W x H): | 20.00*40.00*37.50 mm |