Categories
X-20 S MG
 Click to enlarge 
|
|
| Control System: | PWM Pulse Width Control |
| Processor: | Digital IC |
| Required Pulse: | 0 to 0 V Peak to Peak Square Wave |
| Working frequence: | 0 μs /0 μs |
| Rotation angle sensor: | MAGNETIC INDUCTION ENCODER |
| Rotation: | Left Rotation: 180°, Right Rotation: 180° |
| Voltage: | 0.0V to 0.0V |
| Temperature Range: | 0℃ to 0℃ |
| Driver Type: | |
| Operating Angle: | 0 Deg. one side pulse traveling 0μs |
| Direction: | Clockwise/Pulse Traveling 0μs-0μs |
| Pulse Width Scope: | 0-0μs |
| Neutral pulse: | 1500μs |
| Speed:(No-load ): | 0.00sec/ 40° @ 3.3V |
| 0.00sec/ 40° @ 3.3V | |
| Torque:(Stall Full load): | 0.00 kg . cm @ 3.3V |
| 0.00 kg . cm @ 3.3V | |
| Idle Current: | 0.300 A/ 3.3V 0.300 A/ 3.3V |
| Running Current: | 0.300 A/ 3.3V 0.300 A/ 3.3V |
| Stall Current: | 0.300 A/ 3.3V 0.300 A/ 3.3V |
| Motor Type: | |
| Bearings: | TOP Ball Bearing |
| Bearing Type: | |
| Gear Material: | ALL-STEEL GEAR(SU303) |
| Servo case: | Upper/lower PA66 Mid aluminum |
| Plug: | |
| Connector Wire Length: | 0.00 cm |
| Connector Wire SPEC: | OD0.8mm/16 x 0.08mm 3p x 160mm (JR) |
| Weight: | 0.00 g |
| Dimensions (L x W x H): | 0.00*0.00*0.00 mm |
