Categories
DIGITAL SERVO
 Click to enlarge 
|
|
| Control System: | PWM Pulse Width Control |
| Processor: | Digital IC |
| Required Pulse: | 3 to 5 V Peak to Peak Square Wave |
| Working frequence: | 1500 μs /333 Hz |
| Rotation angle sensor: | Precision Potentiometer |
| Rotation: | Left Rotation: 60° , Right Rotation: 60° |
| Voltage: | 3.3V to 4.2V |
| Temperature Range: | -20℃ to 60℃ |
| Driver Type: | |
| Operating Angle: | 60 Deg. one side pulse traveling 600μs |
| Direction: | Clockwise/Pulse Traveling 900μs-2100μs |
| Pulse Width Scope: | 900-2100μs |
| Neutral pulse: | 1500μs |
| Speed:(No-load ): | 0.11sec/ 60° @ 3.3V |
| 0.08sec/ 60° @ 4.2V | |
| Torque:(Stall Full load): | 0.35 kg . cm @ 3.3V |
| 0.42 kg . cm @ 4.2V | |
| Idle Current: | 0.020 A/ 3.3V 0.020 A/ 4.2V |
| Running Current: | 0.050 A/ 3.3V 0.060 A/ 4.2V |
| Stall Current: | 0.200 A/ 3.3V 0.210 A/ 4.2V |
| Dead Band Width: | 1μs |
| Motor Type: | |
| Bearings: | None Bearing |
| Bearing Type: | |
| Gear Material: | POM |
| Servo case: | ABS |
| Plug: | |
| Connector Wire Length: | 80.00 mm |
| Connector Wire SPEC: | OD0.6/11 x 0.08mm 3p x 80mm (JST-1.50mm) |
| Weight: | 3.00 g |
| Dimensions (L x W x H): | 19.60*8.00*16.30 mm |
